You are viewing documentation for Kubernetes version: v1.18

Kubernetes v1.18 documentation is no longer actively maintained. The version you are currently viewing is a static snapshot. For up-to-date documentation, see the latest version.

Edit This Page

Assigning Pods to Nodes

You can constrain a PodA Pod represents a set of running containers in your cluster. to only be able to run on particular Node(s)A node is a worker machine in Kubernetes. , or to prefer to run on particular nodes. There are several ways to do this, and the recommended approaches all use label selectors to make the selection. Generally such constraints are unnecessary, as the scheduler will automatically do a reasonable placement (e.g. spread your pods across nodes, not place the pod on a node with insufficient free resources, etc.) but there are some circumstances where you may want more control on a node where a pod lands, for example to ensure that a pod ends up on a machine with an SSD attached to it, or to co-locate pods from two different services that communicate a lot into the same availability zone.

nodeSelector

nodeSelector is the simplest recommended form of node selection constraint. nodeSelector is a field of PodSpec. It specifies a map of key-value pairs. For the pod to be eligible to run on a node, the node must have each of the indicated key-value pairs as labels (it can have additional labels as well). The most common usage is one key-value pair.

Let's walk through an example of how to use nodeSelector.

Step Zero: Prerequisites

This example assumes that you have a basic understanding of Kubernetes pods and that you have set up a Kubernetes cluster.

Step One: Attach label to the node

Run kubectl get nodes to get the names of your cluster's nodes. Pick out the one that you want to add a label to, and then run kubectl label nodes <node-name> <label-key>=<label-value> to add a label to the node you've chosen. For example, if my node name is 'kubernetes-foo-node-1.c.a-robinson.internal' and my desired label is 'disktype=ssd', then I can run kubectl label nodes kubernetes-foo-node-1.c.a-robinson.internal disktype=ssd.

You can verify that it worked by re-running kubectl get nodes --show-labels and checking that the node now has a label. You can also use kubectl describe node "nodename" to see the full list of labels of the given node.

Step Two: Add a nodeSelector field to your pod configuration

Take whatever pod config file you want to run, and add a nodeSelector section to it, like this. For example, if this is my pod config:

apiVersion: v1
kind: Pod
metadata:
  name: nginx
  labels:
    env: test
spec:
  containers:
  - name: nginx
    image: nginx

Then add a nodeSelector like so:

apiVersion: v1
kind: Pod
metadata:
  name: nginx
  labels:
    env: test
spec:
  containers:
  - name: nginx
    image: nginx
    imagePullPolicy: IfNotPresent
  nodeSelector:
    disktype: ssd

When you then run kubectl apply -f https://k8s.io/examples/pods/pod-nginx.yaml, the Pod will get scheduled on the node that you attached the label to. You can verify that it worked by running kubectl get pods -o wide and looking at the "NODE" that the Pod was assigned to.

Interlude: built-in node labels

In addition to labels you attach, nodes come pre-populated with a standard set of labels. These labels are

Note: The value of these labels is cloud provider specific and is not guaranteed to be reliable. For example, the value of kubernetes.io/hostname may be the same as the Node name in some environments and a different value in other environments.

Node isolation/restriction

Adding labels to Node objects allows targeting pods to specific nodes or groups of nodes. This can be used to ensure specific pods only run on nodes with certain isolation, security, or regulatory properties. When using labels for this purpose, choosing label keys that cannot be modified by the kubelet process on the node is strongly recommended. This prevents a compromised node from using its kubelet credential to set those labels on its own Node object, and influencing the scheduler to schedule workloads to the compromised node.

The NodeRestriction admission plugin prevents kubelets from setting or modifying labels with a node-restriction.kubernetes.io/ prefix. To make use of that label prefix for node isolation:

  1. Ensure you are using the Node authorizer and have enabled the NodeRestriction admission plugin.
  2. Add labels under the node-restriction.kubernetes.io/ prefix to your Node objects, and use those labels in your node selectors. For example, example.com.node-restriction.kubernetes.io/fips=true or example.com.node-restriction.kubernetes.io/pci-dss=true.

Affinity and anti-affinity

nodeSelector provides a very simple way to constrain pods to nodes with particular labels. The affinity/anti-affinity feature, greatly expands the types of constraints you can express. The key enhancements are

  1. The affinity/anti-affinity language is more expressive. The language offers more matching rules besides exact matches created with a logical AND operation;
  2. you can indicate that the rule is "soft"/"preference" rather than a hard requirement, so if the scheduler can't satisfy it, the pod will still be scheduled;
  3. you can constrain against labels on other pods running on the node (or other topological domain), rather than against labels on the node itself, which allows rules about which pods can and cannot be co-located

The affinity feature consists of two types of affinity, "node affinity" and "inter-pod affinity/anti-affinity". Node affinity is like the existing nodeSelector (but with the first two benefits listed above), while inter-pod affinity/anti-affinity constrains against pod labels rather than node labels, as described in the third item listed above, in addition to having the first and second properties listed above.

Node affinity

Node affinity is conceptually similar to nodeSelector -- it allows you to constrain which nodes your pod is eligible to be scheduled on, based on labels on the node.

There are currently two types of node affinity, called requiredDuringSchedulingIgnoredDuringExecution and preferredDuringSchedulingIgnoredDuringExecution. You can think of them as "hard" and "soft" respectively, in the sense that the former specifies rules that must be met for a pod to be scheduled onto a node (just like nodeSelector but using a more expressive syntax), while the latter specifies preferences that the scheduler will try to enforce but will not guarantee. The "IgnoredDuringExecution" part of the names means that, similar to how nodeSelector works, if labels on a node change at runtime such that the affinity rules on a pod are no longer met, the pod will still continue to run on the node. In the future we plan to offer requiredDuringSchedulingRequiredDuringExecution which will be just like requiredDuringSchedulingIgnoredDuringExecution except that it will evict pods from nodes that cease to satisfy the pods' node affinity requirements.

Thus an example of requiredDuringSchedulingIgnoredDuringExecution would be "only run the pod on nodes with Intel CPUs" and an example preferredDuringSchedulingIgnoredDuringExecution would be "try to run this set of pods in failure zone XYZ, but if it's not possible, then allow some to run elsewhere".

Node affinity is specified as field nodeAffinity of field affinity in the PodSpec.

Here's an example of a pod that uses node affinity:

apiVersion: v1
kind: Pod
metadata:
  name: with-node-affinity
spec:
  affinity:
    nodeAffinity:
      requiredDuringSchedulingIgnoredDuringExecution:
        nodeSelectorTerms:
        - matchExpressions:
          - key: kubernetes.io/e2e-az-name
            operator: In
            values:
            - e2e-az1
            - e2e-az2
      preferredDuringSchedulingIgnoredDuringExecution:
      - weight: 1
        preference:
          matchExpressions:
          - key: another-node-label-key
            operator: In
            values:
            - another-node-label-value
  containers:
  - name: with-node-affinity
    image: k8s.gcr.io/pause:2.0

This node affinity rule says the pod can only be placed on a node with a label whose key is kubernetes.io/e2e-az-name and whose value is either e2e-az1 or e2e-az2. In addition, among nodes that meet that criteria, nodes with a label whose key is another-node-label-key and whose value is another-node-label-value should be preferred.

You can see the operator In being used in the example. The new node affinity syntax supports the following operators: In, NotIn, Exists, DoesNotExist, Gt, Lt. You can use NotIn and DoesNotExist to achieve node anti-affinity behavior, or use node taints to repel pods from specific nodes.

If you specify both nodeSelector and nodeAffinity, both must be satisfied for the pod to be scheduled onto a candidate node.

If you specify multiple nodeSelectorTerms associated with nodeAffinity types, then the pod can be scheduled onto a node if one of the nodeSelectorTerms can be satisfied.

If you specify multiple matchExpressions associated with nodeSelectorTerms, then the pod can be scheduled onto a node only if all matchExpressions is satisfied.

If you remove or change the label of the node where the pod is scheduled, the pod won't be removed. In other words, the affinity selection works only at the time of scheduling the pod.

The weight field in preferredDuringSchedulingIgnoredDuringExecution is in the range 1-100. For each node that meets all of the scheduling requirements (resource request, RequiredDuringScheduling affinity expressions, etc.), the scheduler will compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node matches the corresponding MatchExpressions. This score is then combined with the scores of other priority functions for the node. The node(s) with the highest total score are the most preferred.

Inter-pod affinity and anti-affinity

Inter-pod affinity and anti-affinity allow you to constrain which nodes your pod is eligible to be scheduled based on labels on pods that are already running on the node rather than based on labels on nodes. The rules are of the form "this pod should (or, in the case of anti-affinity, should not) run in an X if that X is already running one or more pods that meet rule Y". Y is expressed as a LabelSelector with an optional associated list of namespaces; unlike nodes, because pods are namespaced (and therefore the labels on pods are implicitly namespaced), a label selector over pod labels must specify which namespaces the selector should apply to. Conceptually X is a topology domain like node, rack, cloud provider zone, cloud provider region, etc. You express it using a topologyKey which is the key for the node label that the system uses to denote such a topology domain; for example, see the label keys listed above in the section Interlude: built-in node labels.

Note: Inter-pod affinity and anti-affinity require substantial amount of processing which can slow down scheduling in large clusters significantly. We do not recommend using them in clusters larger than several hundred nodes.
Note: Pod anti-affinity requires nodes to be consistently labelled, in other words every node in the cluster must have an appropriate label matching topologyKey. If some or all nodes are missing the specified topologyKey label, it can lead to unintended behavior.

As with node affinity, there are currently two types of pod affinity and anti-affinity, called requiredDuringSchedulingIgnoredDuringExecution and preferredDuringSchedulingIgnoredDuringExecution which denote "hard" vs. "soft" requirements. See the description in the node affinity section earlier. An example of requiredDuringSchedulingIgnoredDuringExecution affinity would be "co-locate the pods of service A and service B in the same zone, since they communicate a lot with each other" and an example preferredDuringSchedulingIgnoredDuringExecution anti-affinity would be "spread the pods from this service across zones" (a hard requirement wouldn't make sense, since you probably have more pods than zones).

Inter-pod affinity is specified as field podAffinity of field affinity in the PodSpec. And inter-pod anti-affinity is specified as field podAntiAffinity of field affinity in the PodSpec.

An example of a pod that uses pod affinity:

apiVersion: v1
kind: Pod
metadata:
  name: with-pod-affinity
spec:
  affinity:
    podAffinity:
      requiredDuringSchedulingIgnoredDuringExecution:
      - labelSelector:
          matchExpressions:
          - key: security
            operator: In
            values:
            - S1
        topologyKey: failure-domain.beta.kubernetes.io/zone
    podAntiAffinity:
      preferredDuringSchedulingIgnoredDuringExecution:
      - weight: 100
        podAffinityTerm:
          labelSelector:
            matchExpressions:
            - key: security
              operator: In
              values:
              - S2
          topologyKey: failure-domain.beta.kubernetes.io/zone
  containers:
  - name: with-pod-affinity
    image: k8s.gcr.io/pause:2.0

The affinity on this pod defines one pod affinity rule and one pod anti-affinity rule. In this example, the podAffinity is requiredDuringSchedulingIgnoredDuringExecution while the podAntiAffinity is preferredDuringSchedulingIgnoredDuringExecution. The pod affinity rule says that the pod can be scheduled onto a node only if that node is in the same zone as at least one already-running pod that has a label with key "security" and value "S1". (More precisely, the pod is eligible to run on node N if node N has a label with key failure-domain.beta.kubernetes.io/zone and some value V such that there is at least one node in the cluster with key failure-domain.beta.kubernetes.io/zone and value V that is running a pod that has a label with key "security" and value "S1".) The pod anti-affinity rule says that the pod cannot be scheduled onto a node if that node is in the same zone as a pod with label having key "security" and value "S2". See the design doc for many more examples of pod affinity and anti-affinity, both the requiredDuringSchedulingIgnoredDuringExecution flavor and the preferredDuringSchedulingIgnoredDuringExecution flavor.

The legal operators for pod affinity and anti-affinity are In, NotIn, Exists, DoesNotExist.

In principle, the topologyKey can be any legal label-key. However, for performance and security reasons, there are some constraints on topologyKey:

  1. For pod affinity, empty topologyKey is not allowed in both requiredDuringSchedulingIgnoredDuringExecution and preferredDuringSchedulingIgnoredDuringExecution.
  2. For pod anti-affinity, empty topologyKey is also not allowed in both requiredDuringSchedulingIgnoredDuringExecution and preferredDuringSchedulingIgnoredDuringExecution.
  3. For requiredDuringSchedulingIgnoredDuringExecution pod anti-affinity, the admission controller LimitPodHardAntiAffinityTopology was introduced to limit topologyKey to kubernetes.io/hostname. If you want to make it available for custom topologies, you may modify the admission controller, or simply disable it.
  4. Except for the above cases, the topologyKey can be any legal label-key.

In addition to labelSelector and topologyKey, you can optionally specify a list namespaces of namespaces which the labelSelector should match against (this goes at the same level of the definition as labelSelector and topologyKey). If omitted or empty, it defaults to the namespace of the pod where the affinity/anti-affinity definition appears.

All matchExpressions associated with requiredDuringSchedulingIgnoredDuringExecution affinity and anti-affinity must be satisfied for the pod to be scheduled onto a node.

More Practical Use-cases

Interpod Affinity and AntiAffinity can be even more useful when they are used with higher level collections such as ReplicaSets, StatefulSets, Deployments, etc. One can easily configure that a set of workloads should be co-located in the same defined topology, eg., the same node.

Always co-located in the same node

In a three node cluster, a web application has in-memory cache such as redis. We want the web-servers to be co-located with the cache as much as possible.

Here is the yaml snippet of a simple redis deployment with three replicas and selector label app=store. The deployment has PodAntiAffinity configured to ensure the scheduler does not co-locate replicas on a single node.

apiVersion: apps/v1
kind: Deployment
metadata:
  name: redis-cache
spec:
  selector:
    matchLabels:
      app: store
  replicas: 3
  template:
    metadata:
      labels:
        app: store
    spec:
      affinity:
        podAntiAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
          - labelSelector:
              matchExpressions:
              - key: app
                operator: In
                values:
                - store
            topologyKey: "kubernetes.io/hostname"
      containers:
      - name: redis-server
        image: redis:3.2-alpine

The below yaml snippet of the webserver deployment has podAntiAffinity and podAffinity configured. This informs the scheduler that all its replicas are to be co-located with pods that have selector label app=store. This will also ensure that each web-server replica does not co-locate on a single node.

apiVersion: apps/v1
kind: Deployment
metadata:
  name: web-server
spec:
  selector:
    matchLabels:
      app: web-store
  replicas: 3
  template:
    metadata:
      labels:
        app: web-store
    spec:
      affinity:
        podAntiAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
          - labelSelector:
              matchExpressions:
              - key: app
                operator: In
                values:
                - web-store
            topologyKey: "kubernetes.io/hostname"
        podAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
          - labelSelector:
              matchExpressions:
              - key: app
                operator: In
                values:
                - store
            topologyKey: "kubernetes.io/hostname"
      containers:
      - name: web-app
        image: nginx:1.16-alpine

If we create the above two deployments, our three node cluster should look like below.

node-1node-2node-3
webserver-1webserver-2webserver-3
cache-1cache-2cache-3

As you can see, all the 3 replicas of the web-server are automatically co-located with the cache as expected.

kubectl get pods -o wide

The output is similar to this:

NAME                           READY     STATUS    RESTARTS   AGE       IP           NODE
redis-cache-1450370735-6dzlj   1/1       Running   0          8m        10.192.4.2   kube-node-3
redis-cache-1450370735-j2j96   1/1       Running   0          8m        10.192.2.2   kube-node-1
redis-cache-1450370735-z73mh   1/1       Running   0          8m        10.192.3.1   kube-node-2
web-server-1287567482-5d4dz    1/1       Running   0          7m        10.192.2.3   kube-node-1
web-server-1287567482-6f7v5    1/1       Running   0          7m        10.192.4.3   kube-node-3
web-server-1287567482-s330j    1/1       Running   0          7m        10.192.3.2   kube-node-2
Never co-located in the same node

The above example uses PodAntiAffinity rule with topologyKey: "kubernetes.io/hostname" to deploy the redis cluster so that no two instances are located on the same host. See ZooKeeper tutorial for an example of a StatefulSet configured with anti-affinity for high availability, using the same technique.

nodeName

nodeName is the simplest form of node selection constraint, but due to its limitations it is typically not used. nodeName is a field of PodSpec. If it is non-empty, the scheduler ignores the pod and the kubelet running on the named node tries to run the pod. Thus, if nodeName is provided in the PodSpec, it takes precedence over the above methods for node selection.

Some of the limitations of using nodeName to select nodes are:

  • If the named node does not exist, the pod will not be run, and in some cases may be automatically deleted.
  • If the named node does not have the resources to accommodate the pod, the pod will fail and its reason will indicate why, for example OutOfmemory or OutOfcpu.
  • Node names in cloud environments are not always predictable or stable.

Here is an example of a pod config file using the nodeName field:

apiVersion: v1
kind: Pod
metadata:
  name: nginx
spec:
  containers:
  - name: nginx
    image: nginx
  nodeName: kube-01

The above pod will run on the node kube-01.

What's next

Taints allow a Node to repel a set of Pods.

The design documents for node affinity and for inter-pod affinity/anti-affinity contain extra background information about these features.

Once a Pod is assigned to a Node, the kubelet runs the Pod and allocates node-local resources. The topology manager can take part in node-level resource allocation decisions.